For best results from a piece of wood, it is important to use and care for it properly. Many owners believe that a wood chipper is a machine that can eat through wood no matter what is thrown at it. This is not the case - the piece of wood must be handled with care and patience. In this article, I will tell you how to use a wood chipper and give you tips on how to get the best out of your industrial wood disc chipper machine over and over again.

electric wood chipper

Some of you may own electric wood chippers, so it's important to know how to use one of these machines properly. These small machines are great for cleaning your backyard and will work well with many twigs, leaves, brushes and sticks. When using these machines, many people do not realize that it is important to use the right electric extension cord for the machine to work efficiently.

electric extension cord

If you have an extension cord that is 50 to 100 inches long, it must be 12 in size. This is because the current will drop at the lowest meter, which will degrade the motor performance. Some owners of these shredders have complained about a lack of engine power and blamed it on a poorly designed machine, but the real reason why the machine doesn't turn on is a damaged extension cord. Another consequence of using the wrong size extension cord is that the motor will eventually burn out.

Powered by a standard wall outlet

If you are charging the electric charger from a standard wall socket, make sure that no other appliance has a common socket, as all current will flow through the other appliance again. This is especially true for appliances such as refrigerators or washing machines.

chopper mode

When preparing the cutter for work, be sure to place it on level ground to keep the machine stable and stationary. Also, make sure that you have enough space to feed debris unhindered.

enter the branches in your device

It is important to know which wood chipper to use when feeding the branches into your machine. First of all, keep in mind that the tines are not covered with wet leaves, as they can clog the blades of the machine. If the pile of debris you plan to cut is wet, leave it to dry for another day.

Another reason for jamming the shredder, especially for cheap models, is the import of old wood that has fallen and is too hard for the blade to handle. The best type of wood is a relatively fresh variety.

Tree leaves

Does the cutter / mulch get stuck feeding the leaves themselves? If so, mixing with trees or twigs has been found to improve it. This gives the blade something firm to hold on to when handling the material.

Patience

When entering wood into the machine, it is important to know how to use the chipper. This should be done slowly, allowing the blade of the machine to retract, rather than pushing the tines in and out. It is important to do this by wearing good protective gloves.

turn off the device

After inserting the last shredder, make sure that the machine is still running so that the last piece can slide out. Some owners have turned off the machine, discarding bits that cause problems starting the next shredder.

keep the person sharp

One of the most important things to get the most out of your cutter is to always keep the blade sharp. In some cheaper models, they literally need to be sharpened after each major sawing operation to ensure efficient operation of the machine. Don't worry, it's not as cumbersome as you think, because the blade can now be removed by turning some nuts and bolts. The blades can now be sharpened with a simple wet stone or a high quality file.

Safety

As mentioned above, it is important to wear good protective gloves when using the shredder. It is also very important to wear goggles, and protective headphones are also recommended with interfering equipment. The last thing you want is an injury. This is obviously very important when figuring out how to use a piece of wood.