The Holytek YRT-115 rectangular tenoner is manufactured with two tables for highly efficient operations. Featuring a pneumatically operated table longitudinal traverse and a table tilt of 20ᴼ this machine is designed to produce various types of tenon at depths of 10-45 mm (standard tool) and 6- 90 mm with special tools the centralised control ensures operations are quick and convenient. The three tenonning directions at horizontal, vertical and 45ᴼ can be quickly adjusted by turning the positioning disk. Also, this tenoner is equipped with a mechanical meter to ensure high accuracy when adjusting the tenon size.Get more news about Rectangular Tenoner Making,you can vist our website!

A traditional tenoner is a floor-mounted machine tool, with pairs of cutting heads to shape the tenon. The workpiece is securely clamped to a chassis on rails, and pushed by hand to carry the wood through the cutters.

What is a tenoning machine? Tenoning machines use cutter heads and/or saw blades to form projections (tenons) on pieces of stock. Each tenon can be inserted into a cavity (mortise) on another piece of wood to form a mortise and tenon joint. The figure to the right shows a single-end tenoning machine.
An electric Tenon saw is a portable power tool that utilises a rigid cutting blade that moves in a back and forth motion. The saw has an on/off switch that can be locked in the ‘on’ position by pushing it forwards.
What does a spindle moulder do? Spindle Moulders make profiles, rebates and grooves on the edge of wood, composites or plastics. The machines have either fixed spindles or tilting shafts – tilting spindles give the operator more possibilities for profiling and machining.

How does a bench Mortiser work?
Speaker: Most tools in our shop can do more than one task, but in the case of benchtop mortising machines they have one dedicated job and that is to cut square holes. … When you pull the handle of the machine, you drive both cutters down into the workpiece and that’s what cuts that square hole.

What is a mortise and tenon machine? A mortiser or morticer is a specialized woodworking machine used to cut square or rectangular holes in a piece of lumber (timber), such as a mortise in a mortise and tenon joint.
Compared to other types of saws, tenon saws have more teeth per inch which means they will create a neater finish. However, because of this they cut through materials slower than saws with fewer teeth, thus giving you more control over the depth and direction of the cut.