The artificial skin that was used for the wig base in this utility model has a good sense of touch, excellent adhesion to the scalp, and is also breathable, as demonstrated in the video below. It is preferable to combine at least one or more of these artificial skin materials as a bonding material with a sheet substrate made of nylon resin or the like in a mesh as a bonding material for artificial skin. For example, polyurethane resin, silicone resin, polybutadiene rubber, and ABS resin in the form of sheets are all suitable options. It is also possible to use artificial skin as a material for the ring-like joint part that is in direct contact with the scalp because it has a good sense of touch, adhesion, and is well-suited for the application. Moreover, by incorporating a net into the wig base and allowing air from both inside and outside the wig base to circulate through the mesh of the net, the utility model is able to prevent moisture from enveloping the scalp and itchiness even more effectively than artificial skin.
The greater the area covered by the net and the greater the size of the mesh, the greater the amount of air movement. In addition, when the net is used to support and form the base of the wig as a whole, the effect of preventing moisture and itchiness can be enhanced even further. When it comes to net materials, you can choose from synthetic fibers such as nylon resin and polyester resin, and you can choose from very fine mesh to coarse mesh depending on the application.
Depending on the different number of hair material roots, hairstyle variations, the degree of scalp breathability required, and the purpose of wig use (for example, injury prevention), the appropriate combination can be determined. The upper side of the net is used to secure the hair material, while the lower side of the net provides isolation as well as breathability, ensuring that the bonded part of the hair material does not come into direct contact with the scalp during wear. Additionally, when you want to maintain the strength of the net as well as the shape of the person wearing the wig v. retention force, it is effective to overlap the same type of net multiple times in the same direction. To further prevent hair material from entering the inner side of the net, a mesh is used.
Due to the inversion of the hair, it is possible to configure a net on the upper side with a coarse mesh and a net on the lower side with a fine mesh. Due to the fact that the net is used in an overlapping fashion on the lower side, waste and dirt from the scalp are accumulated on the lower side of the net, making it possible to reuse the wig by simply replacing only the lower side of the net.
As an alternative, it is also possible to use a combination of artificial skin and net as a wig base, in which case it is possible to achieve an effect that combines the characteristics of both artificial skin and net, as previously described
This means that it has a similar touch and smoothness to human skin on the artificial skin that serves as the wig base, which means that it not only has a good touch on the scalp and can achieve a natural feeling of adhesion, but wholesale hair vendors also has high suitability due to its excellent adaptability to the scalp
Furthermore, because of the breathability of the artificial skin, it is possible to prevent moisture from enveloping the scalp and itching
More importantly, when artificial skin and net are combined to form a wig base, the material properties of the artificial skin are effectively utilized, and the net improves the air permeability inside and outside the wig base, allowing water vapor to be effectively prevented from covering the scalp and causing itching, while also attaching the odor of water vapor
Furthermore, because sweat is strongly inhibited from adhering to the base of the wig, the wig can be kept in good condition for an extended period of time. The air permeability of the wig base is further increased as a result of the net being used to construct the entire wig base. As a result, water vapor can be prevented from covering the scalp and the odor of water vapor can be attached. As an example, when two nets are combined on top and bottom to form a wig base, the upper net is used for fixing hair material in place while the lower net is used for air permeability and scalp protection. It is extremely convenient to use because it allows the nets to be used separately for different purposes, allowing the functions of each to be fully utilized and the functions of each to be fully utilized. Furthermore, by employing these two nets in the same thing or in different shapes according to their respective specification purposes, the functions of various functional nets can be utilized to their full potential.
It is also improved the suitability of the attachment to the head by providing an additional ring-like joint on the periphery of the head that covers one side of the top and bottom overlapping nets and covers one side of the top and bottom overlapping nets. Furthermore, by forming a wig from a wig base that has such characteristics, it is possible to create a product with a high level of added value.
