Applying Temporary Tattoos With Complete Transfer Method – A Detailed Guide!

Do you wish to get inked but are immensely afraid of needles and that lifelong commitment? Well, then, consider opting for temporary tattoos. You can apply temporary tattoos on your own. Just follow the below-mentioned steps.

Temporary tattooing has attained widespread recognition throughout the world. Owing to being painless, people of almost all ages are investing in it. Temporary tattoos are very easy to apply on the skin for a short span of time. Most of the temporary tattoos are made with novelty items made with specialised ink quality. The best thing is that these tattoos are not just perfect for the pre-teens but also beauty aficionados of different ages.

 

 

Applying a temporary tattoo perfectly may seem challenging at first, but with a bit of patience, you can rock a transfer design with pride. To know about the steps and other procedures involved, please check out the given discussion now.

Transfer Tattoo

  1. Cleaning Your Skin is the First Step

According to a renowned airbrush artist in Florida, temporary tattoos are usually made of water-based inks, which means they might get repelled by the skin’s natural oils. Clean the area you plan on decorating thoroughly with water and soap. Pat, it dries using a paper towel.

  1. Use Alcohol Based Solution to Make the Area Dry

If you are excessively sweaty, rubbing alcohol help remove the grease. Pour a little rubbing alcohol on a cotton ball and wipe the area carefully. Do not do this daily since rubbing alcohol dries out the skin quickly.

  1. Prepare the Design for the Airbrush Tattoo

Many temporary designs are packaged individually. However, if the tattoo you want comes on a sheet with multiple others, you must separate it. Cut around the tattoo with scissors until you have successfully separated it from the flash sheet.

  1. Eliminate the Backing

Peel off the clear plastic protecting the tattoo. You must be able to view the mirror-image, vibrantly-colored version of the design you have chosen. Call the side with the ink or the one with the clear plastic, the face side.

  1. Wet and Press

Apply the face side against the skin you have cleaned. Do not wiggle the design. Hold it in place firmly until you can move on to the next step. Press a damp sponge or cloth on the face side. To get a clear image, you must wait. Do not remove the cloth or the face side for a full minute. While you are waiting, move as little as possible. Too much movement can blur the lines, and you might end up with a blotch.

  1. Let the Tattoo Dry

Peel off the face side by lifting one of its corners. If the tattoo looks strange or isn’t sticking to the skin, please put the damp cloth back and wait for another minute. Let the tattoo dry. Please resist the urge to touch it. Even flexing can cause tattoo smudging or wrinkling.

  1. Don’t Forget to Moisturize

Dab a little water-based moisturizer. Professional artists offering the best temporary tattoos in Atlanta ask clients to avoid oil-based products such as petroleum jelly since they can smear the tattoo. You can sprinkle baby powder to make the design appear matte.

Quality Control

Innumerable factors affect the overall quality of temporary tattoos. The first and foremost thing is that the stencil must be prepared properly. It is because in case there will poor or dull tooling, the result will be murkier. Additionally, the printing screen must be dealt with properly so that the ink keeps clogging the pores in the screen.

Experts recommend that the ink be compounded because if they are too thick or too thin, the ink will not pass through the screen properly. Then comes the ingredients for the backing paper that must be prepared properly.

One must also take care of the sizing agents and silicone-based release layer, and the transfer film should be coated evenly to minimise any kind of problem while printing. This will also ensure a smooth and even transfer process of the image. Once the manufacturing process is complete, the end product should get careful packaging in order to exclude moisture. If this is not done properly, it may cause bleeding in the ink or premature softening of the transfer film.

Although temporary tattoos are designed to last for a maximum of five days, you can increase the duration with a few simple maintenance tips. These tips also prevent the tattoos from peeling, cracking, and fading. That’s amazing, right? Avoid rubbing or scrubbing the skin when bathing. Stay away from scented oils, lotions, and creams since they may irritate your skin.

So, now that you are aware of how to execute the transfer process of temporary airbrush tattoos, it will be quite easy and helpful for you to make the most of it. Please feel free to share your thoughts with us on how to move ahead with these modern and innovative forms of art in the comment section. You can also share your further queries regarding the application and transfer process of temporary airbrush tattoos.


James Wilson

4 Blog posts

Comments