Solutions of Dust Collector Strike: Open the tube cover to check whether the dust bag is tight, whether the inhale is firmly tied, and cover the tube cover. Check the power supply voltage. If necessary, pay attention to the forward and reverse of the motor.

Change belt: Some industrial vacuum cleaners with belt -type transmission need to replace a new conveyor belt, open the back door of the vacuum cleaner and replace it. If the leather is loose, open the side door, and adjust the control nut to the appropriate position.

Solutions of Dust Collector Strike should be precautions: ordinary (non -explosion -proof) machines are strictly prohibited from being used in the flammable and explosive field; 2. The filter is strictly prohibited, otherwise it will directly lead to damage to the fan; when the filter bag and filter are damaged, they should be replaced in time. ; The temperature at the rear box shell is high, especially after working for a long time, pay attention to burns; the dust barrel accumulation of too many debris should be cleaned in time, and regularly clean the filter bag and filter to ensure smooth flow; after the vacuum cleaner is overloaded The power relay in the control box will automatically cut off the power. At this time, the power plug must be unplugged to find out the reason. After the heat relay is reset, use it; after the work is completed, the power should be cut off and placed in a cool and dry place. This can effectively extend the service life of the industrial SOLUTIONS of Dust Collector Strike.

solutions of dust collector strike https://www.kaisenfilter.com/Dust-Collector-Precautions.html