It is quite easy to maintain the Boulder CO Stamped Concrete structures in your home. In fact, there are numerous methods that you can apply easily and conveniently. It is highly recommended that the surface is sealed with specifically designed sealers that are water and heat resistant as well as durable. These protective materials also allow for the easier and quicker cleaning and maintenance of this type of concrete. The different sealers have different composition. Usually sealers are made primarily from solid materials and they are solvent based. They protect the covered surface from the growth of any sort of fungi and are also highly dirt and dust resistant. If you still find it difficult to maintain this kind of concrete surfaces, there are some other efficient cleaning methods that are quite helpful as well.
Most of the damage done to Stamped Concrete in Boulder CO occurs during the seasons with regular rain falls because they bring a lot of dust and dirt that falls on the outdoor surfaces. If the sealer you have used is efficient, no damage should be incurred and the surface should remain relatively clean. If blotches are visible on concrete after rain, this it is a good sign of the performance of sealer. These blotches can easily be removed by cleaning the surface with water and drying it afterward with a cloth or blower.
It is effortless and not time consuming. And voila, all patches are gone! It is important for the water to be adequately removed from the sealed concrete in order not to create blotches. A fine solution is to grow plants around the concrete floors because they will be continuously absorbing the water near and on them. Similarly, many people use mats made of rubber. Keep in mind that rubber is easily absorbed by the sealer of the stamped concrete, which leaves the surface covered with unwanted patches.
Make sure that this type of concrete is resealed after a certain period of time. The sealer will slowly wear out and lose its insulation qualities, despite the adequate and regular maintenance. The best option is to reseal the concrete structures every four to six months. This will effectively keep the floor protected from the dust and dirt and you will not have to deal with any unpleasant patches any more. The resealing cycle depends on many factors. The insulating material is actually affected by the sunlight, rain and the weight of the objects placed on the concrete structure. So, you have to calculate on your won after how many months you will need to reseal it. The greater the exposure to rain, water and dust, the sooner the stamped concrete requires resealing.
If you do not pay special attention to the resealing process, then it will start losing its functional qualities. Its color will look faded. However, if you reseal the concrete even after it has lost its initial color, you will have a brilliant concrete floor again. If by accident something is spilled on your concrete floor then do not worry at all. All you have to do is to wash it with some dish-washing detergent and then let it dry for some time. You will see that concrete floor can be very easily maintained. Thus, do not hesitate to keep it looking brighter and shiner.
