Many enterprises use laser cutting equipment in cutting operations, and when using laser cutting machines for typesetting, naturally there are many matters needing attention. This is why the final typesetting effect of the same device is completely different. Today, we will talk about what should be paid attention to when using laser cutting equipment for typesetting.

First of all, when using laser cutting equipment for typesetting, pay attention to corner melting. Generally, if the steel plate is not too thick, the corner will melt due to high temperature. In order to prevent corner melting, it is best to use the small radius method to cut at high speed at the corner.

Second, when using laser cutting equipment, attention should be paid to the setting of part spacing. According to experience, when cutting thick plates and hot plates, the spacing should be increased as much as possible. This is related to the size of the cutting material affected by heat. If you do not pay attention, it is easy to have the so-called edge burning during the cutting operation. Therefore, the greater the distance between the materials affected by heat.

Third, pay attention to the lead setting when using laser cutting equipment for typesetting. In order to better connect the gap after cutting, the best way is to reference a transition line at the beginning and end of the cutting operation, namely the leader line and tail line. It should be within the scope of the artifact. Also pay attention to sharp corners and other places that do not radiate heat, even the leads.

Fourth, in the operation of laser cutting equipment, naturally pay attention to the problem of hole edge cutting. Combining two parts, or even more hole edges, can reduce cutting time and improve work efficiency.